Wine Cabinet

Tom Muellner sent in this beautiful wine cabinet. (This is my first attempt to update this blog from my Androit Tablet so let's see what happens! My apologies to Tom if this doesnt come out very well.)

My home shop consists of 4 Shopsmiths: two 10er's and two Mk5's. The age range is 1952 to 1986. One Mk5 is a "shortie' with a 510 table setup.

Why four? I suppose it's because I don't have room for more. What can I say? I'm a "Smith" junkie. Actually, that's usually how I bought them. Other than my original 10er that my dad bought new, all have been acquired in various stages of disrepair. All have been rebuilt by me.

In the process, I've gotten just about all the available accessories. I leave the 510 shortie set as a table saw with the jointer on the end, the 500 powers my bandsaw & is used mostly in horizontal boring or drill press mode, one 10er is mostly lathe or disk sander, and the other 10er is set up as a dado saw & has an extra table with a router mounted under it.

I do some converting or swapping modes from time to time, depending on my needs, but the default setup seems to serve me well.

This is a wine cabinet I built for my son using an old wood wine case as the focal point for bottles. Dados, miters, rabbets, complex operations...all done on the 10er & Mk5. Everything fits. How about that???
Inbox'>My home shop consists of 4 Shopsmiths: two 10er's and two Mk5's. The age range is 1952 to 1986. One Mk5 is a "shortie' with a 510 table setup.

Why four? I suppose it's because I don't have room for more. What can I say? I'm a "Smith" junkie. Actually, that's usually how I bought them. Other than my original 10er that my dad bought new, all have been acquired in various stages of disrepair. All have been rebuilt by me.

In the process, I've gotten just about all the available accessories. I leave the 510 shortie set as a table saw with the jointer on the end, the 500 powers my bandsaw & is used mostly in horizontal boring or drill press mode, one 10er is mostly lathe or disk sander, and the other 10er is set up as a dado saw & has an extra table with a router mounted under it.

I do some converting or swapping modes from time to time, depending on my needs, but the default setup seems to serve me well.

This is a wine cabinet I built for my son using an old wood wine case as the focal point for bottles. Dados, miters, rabbets, complex operations...all done on the 10er & Mk5. Everything fits. How about that???

Pickup Truck Jewelry Box & Golf Cart

These two projects come from Eric in Sebring Fl.  First up is a pickup truck jewelry box.

The wood is aspen and cherry, the plans are from Toys and Joys. I used the SS to rip the the pieces to size with a planer blade, and the SS bandsaw for resawing (only had to do a little sanding on the sawed sufaces. Used my RAS to cut pieces to length, and a 10" band saw for the radius cuts.  The truck is 16" long.

I choose aspen because I wanted a near white wood to contrast with the cherry, it works a lot like poplar.I did not keep tract of the time spent working on the truck I was doing other not so fun projects at the same time, but I think 8-10 hrs of actual time over a two week period.

 Eric also made this model golf cart for his brother-in-law.

His cart is burgundy so using cherry was a no-brainer. The top is aspen, the bags are oak and the clubs are 1/8" dowel and basswood.

Model Car

Considering the craftsmanship on this model car as well as the size, I don't think it's fair to call it a toy!

Here are some photos of my homemade 'Rolls Royce,' my "Project Heavy Roller."

The Shopsmith and its Bandsaw were my main tools.  For patterns, I mostly scaled-up a tiny antique bookend I have, which has a miniature classic car on it.

I roughly cut and bored some walnut wheels to accept some 6203 bearings I had on hand.  After initial turning on the Lathe, I epoxied the bearings inside the wheels, then used a simple jig to turn the glued bearing/wheel combinations against the 12" sanding disk, so that their perimeters were dead true and concentric.

The Drum Sander was very helpful for shaping the wheel-wells of the fenders in a ganged fashion.

Horizontal Boring is one of my favorite operations on the Shopsmith. When using drill-bits, I probably do 70% of my jobs in horizontal mode and 30% in drill-press vertical mode.  Using horizontal-boring allowed me to put dowel-holes in my "headlight blank pieces" prior to turning them, and put dowel-holes in the "engine cover & hood" block, all at precise orientations.  After turning my headlights on the lathe, I just doweled them to the body and they aimed perfectly straight with no fuss at all.

Some steps of the assembly are shown while the woods were fresh (walnut, padauk, cherry, maple, zebrawood, myrtle).   There is also a "aged one year" photo showing how the cherry and padauk have darkened while the walnut has lightened slightly.

Best Regards

Chris
Indianapolis

r

Child's Rocking Chair

This great little rocking chair was built by Bob S. in St. Louis Missouri for his granddaughter. 

This Teddy Bear chair for my GrandDaughter was built with my ShopSmith. Using the table saw, jointer, bandsaw, router function disk, belt & drum sanders.